Statistics and Business Research Method Analysis

Question: Discuss about the statistics and business research method. Answer: Introduction to the Business Research Topic Sustainability has become the major factor, which is continuously emphasised by the leading nations throughout the world. The term has become one of the most valued concepts within the energy industry worldwide as well as the different households in the UK. Therefore, the country has provided significant importance to the recycling process of the waste generated by various households and the primary industries to influence the respective environment for achieving the sustainability (Rodrigues, et al. 2013). It is clear that the achievement of sustainability in the overall industry is known as one of the broader societal systems requiring some planned sets of approach. Thus, the particular research is intended to explore the challenges and opportunities in terms of socio-concerns approaches, which are socially approached and equitable. In order to conduct the research, the critical prominence is provided to the waste management procedures and practices by considering the global enviro nmental concerns. Literature Review This specific section is developed with the intension to focus on the reviewing of literature comprising of the theories concerned with the management of waste. In this case, the selection of literature focusing primarily on the contemporary waste management process is made in a suitable manner covering the challenges encountered during attempting and introducing the proper management practices by the country in line with the environmental sustainability (Caballero-Guzman, Sun, and Nowack 2015). Therefore, the theories and articles reviewed, as part of developing this vital section, bears the primary aim of the research based on the improvement of the sustainability approaches the UK government has undertaken for the last five years towards the overall environment of the country. Based on the investigation to the WasteDataFlow (2014), the particular program named WasteDataFlow was established in 2004 with the purpose of ensuring the challenges can be avoided amongst the different government departments and institutions. One of the most significant challenges can be identified as the repetition of the activities causing the emergence of a particular problem. In order to achieve the purpose, the program has successfully established an electronic access system for accessing the accurate data involving the individual governmental departments promptly (Tanskanen 2013). Moreover, the system also ensured the program to compare the generated data effectively across the local authorities of different regions of the country. Apart from that, the result of an important investigation to the Waste Framework Directive (2008) suggests that program established by the UK government is aimed to recycle 50% of the accumulated waste of the country by 2020. By reviewing the parti cular directive, it can be observed that the factor provides primary emphasis on the maximising efforts of the different producers in a mean to reduce the generated wastes including the industrial and household wastes (Kleme 2013). It is worth to mention that there are different guidelines and frameworks developed by the European Union (EU) for setting the target of waste reduction and recycling. Therefore, the government of UK over the past years has continuously attempted to develop these guidelines for reducing and recycling the amount of wasted generated within the country. Landfill Directive is a practical example of such initiative adopted by the government of the country aiming to reduce the quantity of biodegradable waste to 35%. As dictated by the Office of National Statistics (ONS 2014), the continuous evolution of the WasteDataFlow program can be observed during the time between 2010 and 2014. It is identified that the particular application is responsible for storing and analysing the waste information related to the country by replacing the earlier program known as Audit Commission (Silva, De Brito, and Dhir 2014). The particular evolution of the program during the proposed timeframe was based on conducting the reviewing of information quarterly, instead of annually. Furthermore, the information is accessed and compared electronically, unlike the approaches adopted by the Audit Commission. Considering the initial review of literature, it is clear that the waste management strategies and procedures embraced by the UK government over the past five years focus greatly on the sustainable development of the overall environment. According to UNCSD (2002), various types of challenges related to the society can be successfully identified by the help of these sustainable development practices, which provide stress on how a human should communicate within their surrounding environment. Research Questions The principle questions of the research are based on the basic aim, and these are associated with the primary research objectives integrated with the overall process (Emmanuel and Baker 2012). These questions are formed and highlighted below: How are the waste management procedures and practices evolved and varied within the United Kingdom over the past five years of 2010 to 2014? What are the major differences amongst the introduced wasted management techniques and practices regarding the various regions based on the extracted information from these areas as part of the country? Which region or area is the most ineffective in terms of designing and developing the waste management approaches and practices? Research Methodologies and Techniques In order to achieve the objectives of the research and be able to address the primary research questions adequately, the methods and techniques of the research are shaped up. In the case of this research, the methodologies will be adopted to ensure the generated waste can be reviewed, and the performance of each region of the UK can be measured efficiently (Fewings 2013). Various techniques applied as part of the methodology section will be developed with the purpose of reviewing the overall waste generated in the different regions or states of the country for the past five years (2010 to 2014). Considering the techniques implemented in the methodology section of the overall project, the information extracted from the five primary years will be identified, categorised, and quantified to determine the treatment costs associated with the accumulated waste. Apart from that, the analysis technique of the collected data will be done to check the compliance of the processes with the relevant environmental guidelines (Mead and Gruneberg 2013). The identified techniques will ensure the establishment of an appropriate framework associated with the analysis of waste management across the results obtained from the past five years. Project Plan (Gantt chart) Below section will be comprised of a Gantt chart for clearly highlighting the significant milestones of the research with their expected timeframe for completion. Description of Research Process In order to satisfy the requirements of conducting a five-year review of the waste management techniques and practices embraced by the different regions of the UK, both quantitative and qualitative surveys are considered. Quantitative surveys are based on investigating the database of numerous English WCAs and WCAs from the Eastern Region. The particular approach is identified for ensuring the collection of more information from the different years to establish a suitable report comprising of the research findings (Ng 2012). Importantly, one of the important aims for determining and identifying the quantitative research process is to inaugurate a link between the key findings obtained from the identified literature and the practical examples derived from the numerous regions of the country. It is worth to mention that there is a significant relationship between the socio-economic factors and the recycling rates within the particular community. On the other hand, another important research process is developed by a qualitative survey designed to investigate the feedbacks provided by the different government practitioners (Oakshott 2012). The effectiveness of the process is dedicated to managing the waste services offered to the residents of different regions across the United Kingdom over the past five years. Description of Data Collection and Analysis Method In order to collect the data and analysing the information obtained, four vital sources are considered: Different reports related to the waste contracts within the country as developed by the waste contractors associated with the various industry Different kinds of TA schedules associated with the various industries Reports covering the household production of waste and their successful management by the local authorities The operational system of the intranet system established to track the quantity of waste generated in a particular region Expected Research Outcomes With the help of the proposed methodologies pertaining the research process, techniques, and analysis, it is expected to highlight the generated waste in different areas of the UK and the adopted waste management techniques. The previous research conducted by various scholars over the year by concentrating on the same topic has come up with the findings that England is one of the highest waste generated countries among the other regions of the Kingdom (Suvarna, Layton, and Bancroft 2013). Furthermore, it is indicated that the waste produced in England is typically significant in comparison with the other major cities throughout the world. Therefore, this report is expected to come up with the findings that multiple initiatives and practices accepted by the government of England have successfully able to reduce the waste production by recycling the generated waste from activities of various industries and households (Wu 2012). In conclusion, it is further anticipated that the areas of improvements can be delivered to the government bodies of England to reduce the amount of waste generated in the overall UK. References Caballero-Guzman, A., Sun, T. and Nowack, B., 2015. Flows of engineered nanomaterials through the recycling process in Switzerland.Waste management,36, pp.33-43. Emmanuel, M. and Baker, K. (2012).Carbon management in the built environment. London: Routledge. Fewings, P. (2013).Construction project management. London: Routledge. Kleme, J.J. ed., 2013.Handbook of process integration (PI): minimisation of energy and water use, waste and emissions. Elsevier. Mead, J. and Gruneberg, S. (2013).Programme procurement in construction. Chichester, West Sussex, UK: Wiley-Blackwell. Ng, J. (2012).Understanding the geological and medical interface of arsenic, As2012. Boca Raton: CRC Press. Oakshott, L. (2012).Essential quantitative methods for business, management and finance. Houndmills, Basingstoke, Hampshire: Palgrave Macmillan. Rodrigues, F., Carvalho, M.T., Evangelista, L. and de Brito, J., 2013. Physicalchemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants.Journal of Cleaner Production,52, pp.438-445. Silva, R.V., De Brito, J. and Dhir, R.K., 2014. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production.Construction and Building Materials,65, pp.201-217. Suvarna, S., Layton, C. and Bancroft, J. (2013).Bancroft's theory and practice of histological techniques. [Oxford]: Churchill Livingstone Elsevier. Tanskanen, P., 2013. Management and recycling of electronic waste.Acta materialia,61(3), pp.1001-1011. Wu, S. (2012).Green building materials III. Durnten-Zurich: Trans Tech.